雕刻機是一種數控機床，可應用于各種超薄玻璃的異形切割，精細加工，在玻璃智能化生產中發揮了巨大作用。而雕刻機工作過程中，因為主軸運動會產生大量熱量，如果不及時散熱，會給玻璃精雕機造成嚴重影響，造成工作性能下降，生產精度降低。下面導軌絲杠廠家給行業朋友介紹下雕刻機主軸的降溫方式。

Engraving machine is a CNC machine tool that can be applied to the irregular cutting and fine processing of various ultra-thin glass, playing a huge role in the intelligent production of glass. During the working process of the engraving machine, due to the movement of the main shaft, a large amount of heat is generated. If not dissipated in a timely manner, it will have a serious impact on the glass engraving machine, resulting in a decrease in working performance and production accuracy. Below, the guide rail screw manufacturer will introduce the cooling method for the carving machine spindle to industry friends.

尤其在高速銑削、鉆孔、雕刻中，雕刻機主軸降溫通常有三種方式，水冷、風冷和油冷。

Especially in high-speed milling, drilling, and engraving, there are usually three ways to cool the spindle of the engraving machine: water cooling, air cooling, and oil cooling.

一是通過循環水冷卻主軸

One is to cool the spindle through circulating water

這種方式，通常要設備預留散熱水管道，采用外置冷水機或水塔對主軸進行降溫，它更為，噪音低，而操作溫度也方便，設定好溫度就可以自動降溫了。一段時間后，雕刻機主軸就能降低到可以工作的溫度區間。

This method usually requires the equipment to reserve a hot water pipeline and use an external chiller or water tower to cool the spindle. It is more environmentally friendly, has low noise, and is convenient to operate at a temperature. Once the temperature is set, it can automatically cool down. After a period of time, the main spindle of the engraving machine can be lowered to a temperature range that can work.

二是通過風扇給主軸散熱

The second is to dissipate heat from the main shaft through a fan

風扇散熱，有一定的弊端，就是噪音較高，自身溫度無法降低到佳的狀態，而且會受到車間灰塵環境的影響，造成風扇散熱不良等故障，需定期清理。不過主軸降溫效果還行，設備整體布置會較少。

Fan cooling has certain drawbacks, such as high noise, inability to reduce its own temperature to a optimal state, and being affected by the dust environment in the workshop, resulting in poor fan cooling and other faults. Regular cleaning is necessary. However, the cooling effect of the spindle is still good, and the overall layout of the equipment will be less.

三是通過油冷卻方式給主軸降溫

The third method is to cool the spindle through oil cooling

雕刻機，采用油冷卻降溫方式不太多，因為油脂較容易產生臟污，在極端低溫的情況下，流動性降低，影響制冷效率和降溫效果。而通過加熱潤滑油，會得到較好的散熱效果。

Engraving machines do not use many methods of oil cooling for cooling, as grease is prone to dirt. In extreme low temperatures, the fluidity decreases, affecting the cooling efficiency and cooling effect. By heating the lubricating oil, a better heat dissipation effect can be achieved.

以上就是給雕刻行業朋友介紹的，三種冷卻降溫方式，通常雕刻機多采用導軌絲杠廠家小型冷水機，小功率，不僅方便使用，而且散熱效果較佳，而大功率的可采用水冷冷水機降溫，方便可調主軸降低溫度。更多相關內容就來我們網站http://m.2b4g.com進行咨詢了解！

The above is an introduction to friends in the carving industry. There are three cooling methods. Generally, carving machines use small chillers from guide rail screw manufacturers, which are low-power and not only convenient to use, but also have better heat dissipation effects. For high-power machines, water-cooled chillers can be used to cool down, making it convenient to adjust the main shaft to reduce temperature. For more related content, come to our website http://m.2b4g.com Conduct consultation to understand!