隨著數控機床及其他自動控制設備的廣泛應用，具有摩擦系數小，剛度大、導向精度高等有點的直線導軌正在被越來越多的領域應用，人們也開始重視它的使用與保養。下面導軌絲杠廠家來講講直線導軌的安裝使用與保養注意事項！

With the wide application of numerical control machine tools and other automatic control equipment, linear guideways with small friction coefficient, high stiffness and high guiding accuracy are being used in more and more fields, and people are beginning to pay attention to its use and maintenance. The guide rail lead screw manufacturer will talk about the installation, use and maintenance precautions of the linear guide rail!

直線導軌的安裝使用

Installation and use of linear guide rail

1、請勿自行拆卸，直線導軌的滑塊，以免異物進入影響精度和使用壽命，導軌應該放置在平面上，否則導軌可能會變形。

1. Do not disassemble the slide of the linear guide rail by yourself, so as not to affect the accuracy and service life due to the entry of foreign matters. The guide rail should be placed on a flat surface, otherwise the guide rail may be deformed.

2、如果需要垂直安裝導軌時要留意滑塊是否會掉落，如果滑塊不慎滑落，可聯系廠家。

2. If it is necessary to install the guide rail vertically, pay attention to whether the slide will fall. If the slide falls accidentally, contact the manufacturer.

3、直線導軌產品建議在干凈的環境中使用，在產品外面額外裝置保護罩，以防止灰塵和粉末的進入，從而影響產品精度與使用壽命。

3. Linear guide rail products are recommended to be used in a clean environment. An additional protective cover is installed outside the product to prevent dust and powder from entering, thus affecting the accuracy and service life of the product.

4、如果需要再惡劣的環境中使用直線導軌，比如說腐蝕的環境，需要和廠家溝通對直線導軌進行磷酸皮膜或鍍硬鉻處理。

4. If it is necessary to use the linear guide rail in a harsh environment, such as a corrosive environment, it is necessary to communicate with the manufacturer to carry out phosphate coating or hard chrome plating on the linear guide rail.

5、通常直線導軌的使用溫度上限在80攝氏度，如果超過這個溫度，請和廠家溝通好，為您選擇特殊的直線導軌產品。

5. Generally, the upper limit of the use temperature of the linear guide rail is80 ℃. If it exceeds this temperature, please communicate with the manufacturer to select a special linear guide rail product for you.

直線導軌的保養

Maintenance of linear guide rail

1、直線導軌是精密的機械零部件，所以廠家在出廠前會做防銹處理，買家在使用時請先把防銹油清洗干凈，之后加注潤滑油，潤滑油是不可或缺的。

1. The linear guide rail is a precise mechanical component, so the manufacturer will do anti-rust treatment before leaving the factory. The buyer should clean the anti-rust oil before using it, and then fill in the lubricating oil. The lubricating oil is indispensable.

2、直線導軌產品需要定期的保養，定期做防銹。

2. Linear guide rail products need regular maintenance and regular rust prevention.

3、潤滑油該加就要加，定期檢查一下直線導軌的運行狀況，如果導軌表面沒有油膜覆蓋了就要加潤滑油，如果導軌表面被灰塵和金屬粉塵污染了，可以先用沒有清洗一下再加潤滑油。

3. The lubricating oil should be added as soon as it is needed. Check the running condition of the linear guide rail regularly. If the guide rail surface is not covered by oil film, add lubricating oil. If the guide rail surface is polluted by dust and metal dust, add lubricating oil without cleaning.

此外要預防直線導軌出現銹蝕，如果操作人員需要直接用手去拿取直線導軌的話，那么應該將手中的汗液有效清洗干凈，涂抹上優良的礦油，然后再去拿取直線導軌。更多相關內容就來我們網站http://m.2b4g.com咨詢了解！

In addition, it is necessary to prevent the corrosion of the linear guide rail. If the operator needs to take the linear guide rail directly with his hands, he should thoroughly clean the sweat in his hands, apply fine mineral oil, and then take the linear guide rail. Come to our website for more relevant content http://m.2b4g.com Consult and understand!