Ball screw is widely used in the field of machine tools, but if this high-precision product wants to maintain its performance and extend its life as far as possible, it must develop a good habit of using. So, what are the main problems we should pay attention to in the daily use process?

首要，在運用的過程中要注意滾珠絲杠較大載荷才能，一般情況下預緊載荷是不能超出額定載荷1.1倍的，假如預緊載荷過大的話那就很容易增加滾珠絲杠的摩擦力，進而導致機床作業的時分溫度升高過快，從而對機床的加工精度造成晦氣的影響。即使?jié)L珠絲杠的載荷比較大，在運用的時分也不要在上面放置重物。

First of all, in the process of operation, we should pay attention to the maximum load of the ball screw. Generally, the preload can not exceed the rated load by 1.1 times. If the preload is too large, it will easily increase the friction of the ball screw, which will lead to the excessive increase of the working temperature of the machine tool, thus causing a negative impact on the processing accuracy of the machine tool. Even if the load of the ball screw is relatively large, do not place heavy objects on it when it is in use.

其次，作用的發揮和壽數的保持離不開一個要害的物質，那就是光滑，光滑就適當于是滾珠絲杠的養分。沒有光滑油的滋潤很快就會壽數終止。

Secondly, the role of the play and the number of life can not be separated from a key substance, that is, smooth, smooth and appropriate nutrients for ball screw. Moisture without smooth oil will soon end in life.

光滑油在選購的時分較好是去光滑油專賣店去購買，而且要挑選滾珠絲杠專用的光滑油，光滑油分水才能一定要十分好。在添加光滑油的時分，要確保涂改均勻。

Smooth oil is best purchased at a professional smoothing oil store, and to select the ball screw special smoothing oil, smoothing oil moisture must be very good. When adding smooth oil, make sure the painting is even.

較終，塵埃關于滾珠絲杠來說是十分明顯的有害物質，尤其是當塵埃進入到滾珠絲杠里面的時分會嚴峻損害到它的精度，因?yàn)檫@些塵埃和雜質會增重對滾珠絲杠的磨損。

Ultimately, dust is a very lethal harmful substance for ball screw, especially when it enters the ball screw, it will seriously damage its accuracy, because these dust and impurities will increase weight and wear the ball screw.

關于防塵罩邊緣的縫隙要用的密封材料將其密封好，不留半點縫隙讓塵埃鉆進去。現在普遍運用的就是硅膠材料的防塵圈。

About the edge of the dust cover, the gap should be sealed with professional sealing materials, leaving no gap for dust to drill in. The dust-proof ring made of silica gel is widely used nowadays.

上述信息是我們導軌絲杠整理發布希望對大家有所幫助我們的網站是：http://m.2b4g.com！

The above information is our guide screw finishing and publishing hope to help you all on our website is: http://m.2b4g.com!