Linear guideway can be understood as a rolling guidance, which is infinite rolling cycle of steel balls between slider and guideway, so that the load platform can move along the guideway with high precision and linearity easily, and the friction coefficient can be reduced to one fifth of the normal traditional sliding guidance, which can easily achieve high positioning accuracy. The final unit design between the slider and the guide rail enables the linear guide to withstand loads in both upper and lower directions. The patented reflux system and the simplified structure design allow the linear guide to move smoothly and with low noise.

應用領域：

Application area:

1、直線導軌主要用在自動化機械上比較多，像德國進口的機床，折彎機，激光焊接機等等，當然直線導軌和直線軸是配套用的。

1. Linear guideways are mainly used in automation machinery, such as machine tools imported from Germany, bending machines, laser welding machines and so on. Of course, linear guideways and linear axles are matched.

2、直線導軌主要是用在精度要求比較高的機械結構上，直線導軌的移動元件和固定元件之間不用中間介質，而用滾動鋼球。因為滾動鋼球適應于高速運動、摩擦系數小、靈敏度高，滿足運動部件的工作要求，如機床的刀架，拖板等。如果作用在鋼球上的作用力太大，鋼球經受預加負荷時間過長，導致支架運動阻力提升。

2. Linear guideways are mainly used in mechanical structures with high precision requirements. Rolling steel balls are used instead of intermediate medium between moving and fixed components of linear guides. Because rolling steel ball is suitable for high-speed movement, small friction coefficient and high sensitivity, it meets the working requirements of moving parts, such as tool holder, trailer, etc. If the force acting on the steel ball is too large, the steel ball will endure the preload for too long, which will lead to the increase of the bracket resistance.

滾珠絲杠使用中出現問題原因分析。絲杠加工時用的軸承有很多種類，也能適應各種用途，很多的設備都可以使用絲杠，滾珠絲杠使用中會出現問題，給大家分析下原因有哪些。

Cause analysis of problems in the use of ball screw. There are many kinds of bearings used in the processing of lead screw, which can also be used for various purposes. Many equipments can use lead screw. There will be problems in the use of ball screw. What are the reasons for this?

 

一、碎裂。

First, fragmentation.

1、絲杠中鋼珠破裂，潤滑動作溫升差異會造成鋼珠碎裂。

1. Ball breakage in lead screw and temperature difference of lubrication action will cause ball breakage.

2、絲杠肩部斷裂，主要是設計不當，或者絲杠軸頸彎曲。

2. The breakage of the shoulder of the lead screw is mainly due to improper design or bending of the shaft neck of the lead screw.

 

 

二、間隙太大。

Second, the gap is too large.

1、滾珠絲杠扭轉位移太大，主要是熱處理不當，硬化層太薄，或者硬度分布均勻。

1. Torsional displacement of ball screw is too large, mainly due to improper heat treatment, too thin hardening layer, or even hardness distribution.

2、軸承選用不當，也會造成間隙太大。

2. The improper selection of bearings will also cause too much clearance.

三、鋼珠軌道有異物。

3. There are foreign bodies in the steel ball track.

1、有包裝材料阻礙了鋼珠軌道，或者加工碎屑進入了鋼珠軌道。

1. Packaging materials hinder the ball track, or processing debris enters the ball track.

2、螺帽和螺帽做結合不當。

2. Improper combination of nuts and nuts.

3、造成了絲杠的損壞。

3. Damage to the lead screw.

使用滾珠絲杠遇到問題，若是以上三大問題，可根據原因來解決，就可以及時解決問題在加工了，更多精彩內容就繼續關注我們吧。

When using ball screw, if the above three problems can be solved according to the reasons, we can solve the problems in processing in time. More wonderful content will continue to pay attention to us.

以上信息是由我們導軌絲杠整理發布，希望能對你以后的生活帶來一點幫助，如果你有需要請點擊我們的網站：http://m.2b4g.com！

The above information is organized and published by our guide screw. I hope it will help you in your future life. If you need it, please click on our website: http://m.2b4g.com!